This is a No Vehicles sign. It means all types of vehicles are prohibited from entering.

This sign bans motor vehicles except for class II mopeds, often used in low-traffic or sensitive zones.

This sign prohibits cars, trucks, and similar vehicles, allowing only motorcycles or mopeds.

It prohibits two-wheeled motor vehicles like motorcycles and class I mopeds.

This sign restricts entry for all vehicles pulling trailers.

It prohibits heavy trucks, usually due to weight limits, road design, or environmental concerns.

This prevents agricultural or industrial vehicles from entering certain roads.

This sign prohibits vehicles carrying dangerous goods, such as flammable or explosive cargo.

This is for pedestrian-only or restricted-use areas to keep cyclists out.

It prohibits class II mopeds due to safety, traffic, or noise concerns.

This sign restricts access to roads for animal-drawn carriages, often for safety or modern traffic flow.

This prohibits off-road motor vehicles and trailers, commonly to protect nature or pedestrian zones.

This sign bans horseback riding, usually in pedestrian-heavy, protected, or urban areas.

This indicates pedestrian prohibition, ensuring their safety in areas dangerous for foot traffic.

This is a vehicle width restriction to prevent damage or congestion in narrow lanes.

It signals a maximum height clearance, typically for tunnels or bridges.

This sign limits maximum length to ensure safety on tight curves or short lanes.

This enforces safe spacing, especially in fog, tunnels, or slippery road areas.

It ensures that only vehicles below 12t gross weight can use the road to protect the surface or bridges.

This limits the combined gross weight, critical for bridge and road safety.

BK signs are carrying capacity classifications, ensuring vehicles comply with road strength regulations.

This restricts weight on individual axles to protect road surfaces.

It limits axle group weight, particularly important for weak or elevated road structures.

It prohibits left or right turns when you see the No left/right turn at the junction sign . This sign means drivers must continue straight and cannot turn left or right.

It means no U-turns are allowed . The sign indicates that drivers cannot make a U-turn at this point and must continue in their current direction.

It prohibits overtaking when you see the No overtaking sign . This sign means drivers cannot pass other vehicles on this section of the road.

It means the no overtaking restriction ends . This sign indicates that drivers are now allowed to overtake, as the previous restriction has ended.

It prohibits overtaking with a heavy truck when you see the No overtaking with a heavy truck sign . This sign means heavy trucks are not allowed to overtake other vehicles.

It indicates that the no overtaking with heavy truck restriction ends . This sign means heavy trucks can now overtake, as the previous restriction has ended.

It sets a speed limit of 30 km/h when you see the Speed limit sign . This sign means drivers must not exceed 30 km/h on this road.

It means the temporary speed limit of 20 km/h ends . This sign indicates that the previous temporary speed restriction is no longer in effect.

It requires a stop at a customs point when you see the Stop at customs point sign . This sign means drivers must stop for customs inspection.

It indicates a stop for a stated purpose . This sign means drivers must stop due to a specific reason, such as a signal or instruction.

It prohibits parking when you see the No parking sign . This sign means drivers cannot park their vehicles in this area.

It means no parking on odd-numbered dates . This sign indicates that parking is prohibited on dates like the 1st, 3rd, 5th, etc.

It prohibits parking on even-numbered dates when you see the No parking on even-numbered dates sign . This sign means parking is not allowed on dates like the 2nd, 4th, 6th, etc.

It means date parking is in effect . This sign indicates parking rules based on specific dates, often alternating with odd/even days.

It prohibits stopping or parking when you see the No stopping or parking sign . This sign means drivers cannot stop or park their vehicles in this area.

It indicates a purposeful location . This sign marks a specific location designated for a particular purpose, such as loading.

It marks the end of a purposeful location when you see the Purposeful location ends sign . This sign means the designated area for a specific purpose has ended.

It means a turning area is available . This sign indicates a designated area where vehicles can turn around.

It indicates the end of a turning area when you see the Turning area ends sign . This sign means the designated turning area has ended.

It means no traffic with other studded tires than class II mopeds . This sign prohibits vehicles with studded tires, except for class II mopeds, from proceeding.

It indicates special rules for stopping and parking when you see the Special rules for stopping and parking sign . This sign means specific parking and stopping rules apply between 8 AM and 6 PM.

It restricts the weight on a triple axle to 20 tonnes. This sign means the combined weight on a triple axle must not exceed 20 tonnes.